Key electronics of the Air Cooler and manufacturing standard specifications

Air Cooler is mainly used to cool the hot liquid heat exchanger with air in the development history of the application, the hot air in its tube will be based on the thickness and plate-fin type and the tube vapor for heat transfer, and the vapor is usually given by the exhaust fan, Home Air Cooler can be used as cooling or condensing, applied in smelters, petrochemical equipment tower on the condensation of vapor, flow to the oil, tower bright oil cooling. Next, we take a look at the key electronics and manufacturing standard specifications for the Air Cooler. Here are some answers.

Here is the content list:

• The Air Cooler's manufacturing standard specification.

• The key electronics of the Air Cooler.

The Air Cooler's manufacturing standard specification.

Air Cooler in the application of its column type reasonable layout of thermal conductivity covers a large area and vapor throughout the uniform, good thermal conductivity, in the development of the application of the course for the oblique guide column reasonable layout of the case, its air circulation opportunities installed in the herringbone in the middle of the interior space design, in the application of a small footprint area and compact structure. To better be able to better offset the vapor side of the gives heat index lower harm, in the establishment of the application will usually be used daylight led tube surface mounted fins of the pipeline, finned tube radiator as heat conduction tube can expand the heat conduction footprint. The finned tube radiator is arranged in layers, and its sides are connected to the tube box by arc welding or expansion methods. The tube slots are generally in rows of 3 to 8.

The key electronics of the Air Cooler.

Table Air Cooling Fan in the operation of the development process for the finned tube radiator is the key electronic device, in the establishment of the use of its raw materials and methods can be used at the same time injury key pieces, in the operation of its pipeline can be made of carbon steel, copper, aluminum and stainless steel plates, plate-fin type raw materials according to the use of standards and production process to establish, most of the industrial production of pure aluminum, in the corrosion resistance requirements, are very high or in the production and manufacturing copper or stainless steel plates are also used in standardized cases.

Its tube box structure can be effectively divided into fusion column tube heat exchanger, tube plug type, and butt check valve, generally, the former applies to low and medium pressure, and the latter two are used for pressure. To fuse the thermal deformation taught, one end of the tube box is not fixed, allowing for a deviation along the length. The function of the Air Cooler is to cause cooling or condensation, which is a type of heat exchanger, and the type of cooling or condensation is based on the thickness or plate-fin type of heat transfer with the vapor in the tube, the vapor is generally given by the smoke exhaust fan, but the power consumption is large and the expected effect of cooling or condensation is vulnerable to the weather.

Committed to bringing more and better products to our customers, this is what we have been doing. If you are interested in Air Cooler, you can contact us at https://www.helenbo.com/, we welcome you and look forward to working with you.