Air Cooler Explanation and Construction Options

Generally speaking, Air Cooler means a device that uses air as a cooling medium to cool the heat flow to the required temperature to help the required equipment operate normally and efficiently. Many people want to buy but have no idea where to start. Next, let's take a look at the Air Cooler's explanation and structure options.

Here is the content list:

• An explanation of the Air Cooler.

• Construction options for the Air Cooler.

An explanation of the Air Cooler.

The Air Cooler is not a fan, nor is it an air conditioner. Traditional fans circulate air without compromising cooling. The refreshing feeling of a powerful fan comes from the sensation on your skin, not the actual change in ambient temperature. Air conditioners, on the other hand, can lower indoor temperatures, but they require a lot of energy to do the job. Additionally, they use refrigerant gas to chemically compress the hot air and keep it cool by expelling the hot air outside. These factors make them a less environmentally friendly option. Unlike a fan, the Air Cooler also cools the surrounding area. However, they are not air conditioners. Under test conditions, with ideal variables, the Table Air Cooling Fan reduces temperatures by up to 15°F. In contrast, air conditioners have a larger cooling range. In conclusion, the Air Cooler can be described as an upgrade to a traditional fan, consuming the same amount of power but throwing out cooler air.

Construction options for the Air Cooler.

Air Cooler cold water inlet temperature should be at least 3.5°C lower than the air outlet dry bulb temperature, cold water temperature rise should be 5-10°C, and its flow rate should be 0.6-1.5m/s. The evaporation temperature of the refrigerant direct expansion Air Cooler should be at least 3.5°C lower than the air outlet Wendi; when the normal temperature air-conditioning system is fully loaded, the evaporation temperature should not be lower than 0°C; when the load is low, the surface should be prevented from frosting. The lower part of the Home Air Cooler should be installed with a drip tray and a drain pipe. When the coolers are stacked, an intermediate drip tray and a drain pipe should be installed between the two coolers. The drain pipe should be provided with a water seal to prevent air from being sucked in. When choosing Air Cooler, factors such as surface area ash, inner wall scaling, and other factors should be considered and additional coefficients should be added to increase the heat transfer area. During operation, the decrease of the heat transfer coefficient can also be compensated for by reducing the initial temperature of the water.

Our official website is https://www.helenbo.com/. If you work with Air Cooler or want to know more about our company, you can communicate with us on the website. Our cost-effective products are well received by everyone. Our company adheres to the corporate culture of "quality first, customer first", and always makes unremitting efforts to become a professional Air Cooler supplier in the industry.